查看“아두이노 IDE 드라이버 설치하기”的源代码

{| style="width: 800px;"
|-
|
==준비하기==
*소프트웨어：
   아두이노 통합 개발환경, 마이크로두이노 개발환경 설정패키지 : [[Microduino-hardware.zip]]
*하드웨어:
   Microduino-USBTTL(FT232RL)보드, USB 케이블
==설정절차==
'''Mac 컴퓨터에 설치하기 :'''
[[File:mac_microduino.pdf]]

'''Window 시스템에 설치하기 :'''
*아두이노 개발환경 다운로드 하기
http://arduino.cc/en/Main/Software

*특정 폴더에 다운받은 화일의 압축을 푼다.Uncompress the Arduino IDE package to a specific folder;

*Connect the Microduino FT323R to PC with the MicUSB cable;

*After the new hardware was recognized, then will search the driver in system. If con't find the driver, need install it manually.

*Click the right button on "computer", then click "manager".
[[File:Microduino-Start1.jpg|thumb|center|600px|Microduino]]

*Then open the "Device Manager", you can see the uncognized hardward with a exclamation.

[[File:Microduino-Start2.jpg|thumb|center|600px|Microduino]]

*Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software.

[[File:Microduino-Start3.jpg|thumb|center|600px|Microduino]]


*Then select the drivers directory in Aduirno IDE directory.
'''Note, if your computer reports that can't find the driver, need to be further positioning to the directory \drivers\FTDI USB Drivers'''

[[File:Microduino-Start4.jpg|thumb|center|600px|Microduino]]

*Click next, then install the driver.

[[File:Microduino-Start5.jpg|thumb|center|600px|Microduino]]

[[File:Microduino-Start6.jpg|thumb|center|600px|Microduino]]

*After the driver installed successfully, you can see the COM port.
[[File:Microduino-Start7.jpg|thumb|center|600px|Microduino]]

|}