查看“Microduino-Cube-S1”的源代码

{{Language | Microduino-Cube-S1}}
{| style="width: 800px;"
|-
|
[[File:Microduino-S1-rect.jpg|400px|thumb|right|Microduino-Cube-S1]]
==Features==
*Compatible with the pin of Arduino Uno;
*Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
*Onboard analog button and sensor interface;

==Specification==
*Electrical specification
**MicroUSB power supply；
**3.3V constant voltage；
**Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V)；
**Onboard power supply indicator(5V and PWR) ；

*Extension
**Onboard reset button；
**The fixed OLED base；
**Two serial ports including (RX0,TX0)and (D2,D3)；
**Two IIC interfaces；
***Two analog button interfaces connected to A7；
**The sensor interface can be selected and combined through jumpers：
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).

[[file:Microduino-Cube-S1-Pinout1.jpg|800px|thumb|center|Microduino-Cube-S1]]
[[file:Microduino-Cube-S1-Pinout2.jpg|800px|thumb|center|Microduino-Cube-S1-Pinout]]
[[file:Microduino-Cube-S1-Pinout3.jpg|800px|thumb|center|Microduino-Cube-S1-Pinout]]

==Document==
Eagle PCB: '''[[File:Microduino-Cube-S1.zip]]'''

Main Component：
*3.3V Voltage Stablizing chip LP2985： '''[[File:LP2985.pdf]]'''

==Development==

Microduino-Cube-S1 is capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard, achieving specific function.

[[file:Microduino-Cube-S1-Pinout4.jpg|800px|thumb|center|Microduino-Cube-S1]]

==Application==
*You can download Microduino test program, which together with OLED to test the function of Microduino-Cube-S1's two analog buttons. Just as follows:
https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073
*Hardware Needed：Microduino FT232R, Microduino Core, Microduino-Cube-S1 and Microduino OLED；
*Software Needed：Microduino example program (Arduino part) and Arduino IDE(Version 1.0 and higher)；
*Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", then download directly;
*After the download, "No button is pressed " is displayed on the OLED,
**Press the left button and "Press the left button" will come out, meaning the left button gets pressed；
**Press the right button and "Press the right button" will be displayed on the OLED, meaning the right button is pressed；
**When no button is pressed, "No button is pressed " will be displayed, which is just like the initial state.

==Bug==

==History==

==Picture==

==Front==
[[file:Microduino-Cube-S1-F.JPG|thumb|600px|center|Microduino-Cube-S1 Front]]
==Back==
[[file:Microduino-Cube-S1-b.JPG|thumb|600px|center|Microduino-Cube-S1 Back]]
==Video==
|}