查看“Microduino-Cube-V1”的源代码

{{Language | Microduino-Cube-V1}}
{| style="width: 800px;"
|-
|
[[File:Microduino-V1-rect.jpg|400px|thumb|right|Microduino-Cube-V1]]
==Features==
*Pin compatible with Arduino uno;
*Two UPin-27 standard interface bases connected with the corresponding pins；
*Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
*Two bases are arranged longitudinally with pins interconnected on the board, making it possible to reduce the stacking height;
*Onboard analog button and sensor interface;

==Specifications==
*Electrical specification
**MicroUSB power supply；
**3.3V constant voltage；
**Select the 5V or 3.3V power via PWR jumper.(The default voltage is 3.3V)；
**Onboard power supply indicator(5V and PWR)；

*Extension
**Onboard reset button；
**Fixed OLED base；
**Two serial ports including (RX0,TX0)and (D2,D3)；
**Two IIC interfaces；
**Two analog button interfaces connected to A7；
**Seven analog buttons with two on the board connected to A6 and five on the stacking board connected to the interface of the base with Dupont lines；
**Below are two groups of sensor interfaces which can be selected and combined through jumpers. Users can choose different jumper connection as they like:
***PWR，GND，A3 or PWR，GND，A6；
***PWR，D5，GND or D4，D5，GND。

[[file:Microduino-Cube-V1-Pinout1.jpg|800px|thumb|center|Microduino-Cube-V1-Pinout]]
[[file:Microduino-Cube-V1-Pinout2.jpg|800px|thumb|center|Microduino-Cube-V1-Pinout]]
[[file:Microduino-Cube-V1-Pinout3.jpg|800px|thumb|center|Microduino-Cube-V1-Pinout]]


*Components
**Base board：The board with two UPIN-27 standard interfaces;

**Overlay board: The fixed board of five analog buttons and an OLED;
[[file:Microduino-Cube--Pinout1-Pinout4.jpg|800px|thumb|center|Microduino-Cube-S1]]

==Document==
Eagle PCB : '''[[File:Microduino-Cube-V1.zip]]'''

Main components：
*3.3V Voltage Stablizing Chip LP2985： '''[[File:LP2985.pdf]]'''

==Development==
It can be used with other Microduino modules, sensor to achieve specific functions.

==Application==
*You can download the test example, and combine OLED to test two analogy of Microduino-Cube-V1, test program '''[[Microduino-Cube-V1-Text.zip]]'''
*Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-V1, Microduino OLED；
*Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
*Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
*After the download is completed, OLED displays similar patterns with analogy keyboard. Press each button on floor and roof analog buttons can simulate the corresponding position's button.

==Buy==

==History==

==Picture==

==Front==
[[file:Microduino-Cube-V1-F.JPG|thumb|600px|center|Microduino-Cube-V1 Front]]
==Back==
[[file:Microduino-Cube-V1-b.JPG|thumb|600px|center|Microduino-Cube-V1 Back]]
==Video==
|}