查看“Microduino-Cube-S1”的源代码

{{Language | Microduino-Cube-S1}}
{| style="width: 800px;"
|-
|
[[File:Microduino-S1-rect.jpg|400px|thumb|right|Microduino-Cube-S1]]
==Features==
*Compatible with the pin of Arduino Uno;
*Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
*Onboard analog button and sensor interface;

==Specification==
*Electrical specification
**MicroUSB power supply；
**3.3V constant voltage；
**Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V)；
**Onboard power supply indicator(5V and PWR) ；

*Extension
**Onboard reset button；
**The fixed OLED base；
**Two serial ports including (RX0,TX0)and (D2,D3)；
**Two IIC interfaces；
***Two analog button interfaces connected to A7；
**The sensor interface can be selected and combined through jumpers：
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).

[[file:Microduino-Cube-S1-Pinout1.jpg|800px|thumb|center|Microduino-Cube-S1]]
[[file:Microduino-Cube-S1-Pinout2.jpg|800px|thumb|center|Microduino-Cube-S1-Pinout]]
[[file:Microduino-Cube-S1-Pinout3.jpg|800px|thumb|center|Microduino-Cube-S1-Pinout]]

==Document==
Eagle PCB local downlaod
Main components：
*3.3V Regulator chip LP2985： '''[[File:LP2985.pdf]]'''

==Development==

It can be used with other Microduino modules, sensor to achieve specific functions.

[[file:Microduino-Cube-S1-Pinout4.jpg|800px|thumb|center|Microduino-Cube-S1]]

==Application==
*You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program：
https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073
*Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED；
*Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
*Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
*After download, OLED displays "No button is pressed ",
**Press the left button, OLED displays "Press the left button" which means the left button was pressed；
**Press the right button, OLED displays "Press the rignt button" which means the right button was pressed；
**If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.

==Bug==

==History==

==Picture==

==Front==
[[file:Microduino-Cube-S1-F.JPG|thumb|600px|center|Microduino-Cube-S1 Front]]
==Back==
[[file:Microduino-Cube-S1-b.JPG|thumb|600px|center|Microduino-Cube-S1 Back]]
==Video==
|}