查看“Core STM32 Startup Guide”的源代码

{| style="width: 800px;"
|-
|
=Setup Microduino-CoreARM with Maple IDE (Windows)=

* Download Maple IDE on
    http://leaflabs.com/docs/maple-ide-install.html#maple-ide-install
* Although the document says Maple only supports WinXP 32-bit, but you can also run it on Windows 7 or Windows 8 with some workaroud.
[[File:01_download_maple.png|thumb|center|600px|Download Maple IDE]]

* UnZip the Maple IDE into a folder, like C:\maple\
* If you are using Windows XP, just plug Microduino-CoreARM into your USB port,  Open your Device Manager, you will see a Device named "Maple", with a yellow exclamation.
* Right click on the Maple, Select "Update Driver". Click on "Not this time", then Next.
* Select the following option: Install from a list or specific location (Advanced), and then click Next.
* Select "Search for the best drivers in these locations", Click on "Include this location in the search, and then Browse into folder like "C:\maple\drivers", Click Next.
* You should now have the CoreARM driver installed.

=== If you ar using Windows 7 64bit or Windows 8 ===

Try this http://wiki.leaflabs.com/Maple_IDE_Windows_8_Installation

= Programming Microduino-CoreARM =

* Make sure you have already installed driver of CoreARM

* Download and setup Microduino-CoreARM hardware supporting package

* Run Maple IDE, click menu Tools -> Board, select Microduino-CoreARM to RAM if you just want to test the program, or Microduino-CoreARM to Flash if you want to run the program after resetting the board.



|}