查看“Microduino-Duo-h2”的源代码

{{Language|Microduino-Duo-h2}}
{| style="width: 800px;"
|-
|
[[file:Microduino-Duo-h.jpg|400px|thumb|right|Microduino-Duo-h]]
Microduino-Duo-h2 is a horizontal extension board for Microduino other module.
|-
|
==Features==
*Pin compatible with Arduino uno;
**2.54 pitch Female Heade is Microduino module based, the same name of the pins are connected to each other in the board, each pin is installed with the power and ground to facilitate debugging;
*Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
*Two Female Heade's each pin interconnects and horizontal arrangement on the board which can reduce the overlay height;

==Specifications==
*3.3V regulator;
*Onboard power supply (5V, 3.3V) and indicator;
*Reset button on board;
*MicUSB power supply;
*Two Microduino UPIN27 seat Interconnects and horizontal arrangement on the board.

[[File:Duo-h-Pinout-2.jpg|800px|thumb|center|Microduino-Duo-h-Pinout]]

==Document==

==Development==
Set up the quick connection with other Microduino modules and sensors easily and flexibly.

==Application==
Overlay arbitrary Microduino module to compose different system, and reduce the height.

==Pictures==
[[file:Microduino-Duo-h-t1.jpg|thumb|600px|center|Microduino Duo-h Front]]
[[file:Microduino-Duo-h-b.jpg|thumb|600px|center|Microduino Duo-h Back]]

|-
|
|}