查看“Microduino-BM”的源代码
←
Microduino-BM
跳转至:
导航
、
搜索
因为以下原因,您没有权限编辑本页:
您所请求的操作仅限于该用户组的用户使用:
用户
您可以查看与复制此页面的源代码。
{| style="width: 800px;" |- | [[File:Microduino-BM-rect.jpg|400px|thumb|right|Microduino-BM]] '''[[Microduino-BM]]''' module is an integrated single-cell Li-ion battery charge management, power detection and LED indication, the boost to 5V output, LDO to 3.3V output of discharge management module. |- | ==Features== * Charge and discharge management, power detection, 5v boost, 3.3v LDO highly integrated; * DIP switch gear charging and discharging, a key to open, hibernation module; * Small, cheap, stack, open; * Unified Microduino interface specification, and rich peripheral modules can be easily and flexibly with other eligible Microduino interface specification modules, sensors for quick connection and expansion; * 2.54 pitch row female connector for easy integration into breadboard. |- | ==Specifications== * First, let's look at the interface of the module: * A key switch * A two tranches DIP switch gear * One pair of 2.54 battery interface ("+" then the battery positive, "-" then the battery negative) * UPIN27 on the role of interface has 5V, 3V3, GND: |- | ==Charging== * First access external 5V charging power supply, and then switch to "IN", the module into the charging state, then four LED lights do Surge charging indication (detailed display mode, please refer to HT4901 documentation), the maximum charging current to 500mA, charging is completed * after the first switch to OUT, and then unplug the external 5V charging power. * Note: * Always follow the charging process: make sure switch to OUT, plug in the battery, charging access external 5V power supply, the switch in the IN, start charging, charging is completed, the switch to OUT, unplug the external 5V Charge power. * Recommended charging power supply: Voltage 5v, current 600ma above; * Not add pressure drop impact elements (diodes) in the charging circuit, so as not to reach the charging voltage, thereby affecting the charging current. |- | ==Discharge== * Make sure the switch is in the OUT, after access to the battery, in the standby mode, short press button switch (time> 50mS), the module that wakes up from standby mode; boost output started at this time, while open UPIN27 the GND circuit: Interface 5V 5V output voltage, maximum current of 500mA; while 3V3 interface output voltage of 3.3V, the maximum current 250mA. * When the battery voltage under-voltage (3.3V) or enter limiting / boost output short circuit protection, enter standby mode. * Note: * Make sure the switch is in the OUT and then start boost output; * please do not toggle switch in Battery-powered process. |- | ==Power detection== * Make sure the switch is in the OUT, after access to the battery, press button switch on the built-in battery detection; and through the four LED indicator for battery indicator, battery indicator after 3 ~ 5S closed. |- | ==Standby== * (Standby circuit is disconnected UPIN27 the GND and BM can be controlled within the overall power consumption of 30uA) * Make sure the switch is in the OUT, if any action after accessing the battery, then the default is in standby mode. * When you've turned on discharge mode by pressing the button switch (3s above) to enter standby mode. * Intelligent Detection: No charge input, no discharge output (<10mA) within three minutes into standby mode. |- | ==Documents== * Snapshot of '''[[Microduino-BM]]''' schematic :[[file:Microduino-BM-SCH.png|600px|thumb|left|Microduino-BM Schematic]] <br style="clear: left"/> :[[file:Microduino-BM-PCB.png|600px|thumb|left|Microduino-BM PCB]] <br style="clear: left"/> * '''[[Microduino-BM]]''' Eagle source file 【'''[[media:Microduino-BM.zip|download]]'''】 * '''[[Microduino-BM]]''' main chips and devices :[[file:Micromodule-BM-1.png|800px|thumb|left|Microduino-BM-Pinout]] <br style="clear: left"/> :[[file:Micromodule-BM-2.png|800px|thumb|left|Microduino-BM-Pinout]] '''The main components''' *Chip 1: HT4901 HT4901 Application guidelines [[Media: HT4901 Application guidelines V1.1.pdf]] *Chip 2: LP2985AIM5X-3.3 [[Media:LP2985.pdf]] *MOS tube: AO3400 [[Media:AO3400.pdf]] *Schottky diodes: MBR0520 [[Media:MBR0520.pdf]] *Button switch: TS-018 [[Media:TS-018.pdf]] *Toggle switch: MSK-12C01 (1P2T) [[Media:MSK-12C01 (1P2T) pdf]]. <br style="clear: left"/> |- | ==Development== |- | ==Applications== |- | ==Pictures== [[file:Micrmodule-BM-T.jpg|thumb|600px|center|Micrmodule BM Front]] [[file:Micrmodule-BM-B.jpg|thumb|600px|center|Micrmodule BM Back]] |- | ==History== |}
该页面使用的模板:
模板:Language
(
查看源代码
)
模板:Nmbox
(
查看源代码
)
返回至
Microduino-BM
。
导航菜单
个人工具
创建账户
登录
名字空间
页面
讨论
变种
视图
阅读
查看源代码
查看历史
更多
搜索
Welcome
首页
创客大赛
大赛详情
3D打印
安装月球车
图形化编程
操控月球车
升级月球车
编程工具下载
软件下载
Arduino
Processing
Mixly
Scratch
模块套件
Microduino 102
mCookie 102
mCookie 202
mCookie 302
IBC
其他
应用套件
四轴飞行器
平衡车
小车CUBE
音乐播放器
刷卡音乐播放器
wifi气象站
彩虹音乐触摸灯
分贝检测仪
迎门汇报
LED点阵时钟
LED点阵屏幕
硬件
mCookie
Sensor
Microduino
MicroWrt
MicroNux
MicroRobot-Core
MicroRobot-CoreESP
ideaBoard
ideaBox
MicroMV
MicroAI
帮助
常见问题
帮助
工具
链入页面
相关更改
特殊页面
页面信息