查看“Setup Guide on Mac OS X”的源代码

{| style="width: 800px;"
|-
|
==Equipment==
*Software：
Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage;
*Hardware:
Microduino FT232R、Micro-USB cable；
==Congfigure procedure==

*Download Arduino IDE
http://arduino.cc/en/Main/Software
[[File:01 arduino IDE mac.png|thumb|center|600px|Arduino IDE for Mac]]


*Uncompress the Arduino IDE package to Applications folder;

*Connect the Microduino FT323R to PC with the Micro-USB cable;

*After the new hardware was recognized, then will search the driver in system. If con't find the driver, need install it manually.

*Click the right button on "computer", then click "manager".
[[File:Microduino-Start1.jpg|thumb|center|600px|Microduino]]

*Then open the "Device Manager", you can see the uncognized hardward with a exclamation.

[[File:Microduino-Start2.jpg|thumb|center|600px|Microduino]]

*Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software.

[[File:Microduino-Start3.jpg|thumb|center|600px|Microduino]]


*Then select the drivers directory in Aduirno IDE directory.
'''Note, if your computer reports that can't find the driver, need to be further positioning to the directory \drivers\FTDI USB Drivers'''

[[File:Microduino-Start4.jpg|thumb|center|600px|Microduino]]

*Click next, then install the driver.

[[File:Microduino-Start5.jpg|thumb|center|600px|Microduino]]

[[File:Microduino-Start6.jpg|thumb|center|600px|Microduino]]

*After the driver installed successfully, you can see the COM port.
[[File:Microduino-Start7.jpg|thumb|center|600px|Microduino]]




Please refer to:
[[File:Mac microduino.pdf|thumbnail|Setup Guide on Mac OS X]]

|}