查看“Microduino-Core”的源代码

{| style="width: 800px;"
|-
|
[[file:Microduino-core-rect.jpg|400px|thumb|right|Microduino-Core]]

'''[[Microduino-Core]]''' is one of core modules of Microduino series, '''[[Microduino-Core]]''' 

is an open source hardware and Arduino Uno compatible. It is an 8-bit microcontroller development 

board, based on Atmel ATmega328P/ATmega168PA series.

Comparing to Arduino Uno, '''[[Microduino-Core]]''' is featured by:
* Microduino splits '''[http://arduino.cc/en/Main/ArduinoBoardUno Arduino Uno]''' into two parts: 

'''[[Microduino-Core]]''' and '''[[Microduino-FT232R]]''' modules -- MCU and USB2TTL parts. it 

means once designers uploaded program into '''[[Microduino-Core]]''', '''[[Microduino-FT232R]]''' 

will be not necessary anymore, designers could have many Microduino-Core/Core+ modules with only 

one '''[[Microduino-FT232R]]'''. The board size becomes very small as only 25.4mm X 27.94mm 

(1.0inch X 1.1inch), like a quarter.
* Microduino series uses the U-Shape 27-pin interface (UPin-27), the standard interface of 

Microduino, all Microduino modules and sensors can be easily stacked and extended, it is delivered 

ready to plug in.
* With tiny shape and uniform interface, Microduino series dramatically decreases the size and 

cost of design prototype, remarkable improves usability and flexibility of Arduino-compatible 

boards, as well as user experience.


Microduino uses the same development environment as Arduino IDE, designers can use the Arduino 

IDE, Processing on Microduino for idea realization, prototype development and low volume 

production.

Microduino uses optiboot for bootloader, it takes less Flash than Arduino default engine and 

optimizes program uploading.

Currently, there are 4 different configurations for '''[[Microduino-Core]]''' modules:
{|class="wikitable"
! Type
! Flash
! SRAM
! EEPROM
! Frequency
! Supply
|-
| Atmega328P@16M，5V 
| 32K
| 2K
| 1K
| 16M
| 5.0V
|-
| ATmega328P@8M，3V3 
| 32K
| 2K
| 1K
| 8M
| 3.3V
|-
| ATmega168PA@16M，5V 
| 16K
| 1K
| 512
| 16M
| 5.0V
|-
| ATmega168PA@8M，3V3 
| 16K
| 1K
| 512
| 8M
| 3.3V
|}
Different configurations in frequency and supply voltage:
* Clock frequency and supply voltage are paired, 8M module is supplied by 3.3V voltage, while 16M 

module is by 5.0V voltage. 
* A 16M with 5V '''[[Microduino-Core]]''' module is recommended for desktop equipments or designs; 

regarding mobile equipments or designs, a 8M with 3.3V module is suggested for low power and 

battery supply purposes.



|-
|
==Core vs Core+==
* Microduino also provides '''[[Microduino-Core+]]''' module, aiming at high performance 

applications which require large SRAM/EEPROM/Flash and more I/O ports.

* Both '''[[Microduino-Core]]''' and '''[[Microduino-Core+]]''' use UPin-27 interface -- the 

standard module interface of Microduino series. The main difference between them is MCU chip: -

Core module uses ATmega328P/ATmega168PA, as same as Arduino Uno; -Core+ module uses 

ATmega644PA/ATmega1284P, its performance is similar to Arduino Mega2560.

* Configuration difference between '''[[Microduino-Core]]''' and '''[[Microduino-Core+]]''' 
:{|class="wikitable"
! Microduino
! Chip
! Flash
! SRAM
! EEPROM
! Digital I/O
! Analog I/O
! PWM
! Hardware Serial
|-
| rowspan="2" | Core
| Atmega168PA 
| 16K
| 1K
| 512
| 23
| 8
| 6
| 1
|-
| ATmega328P 
| 32K
| 2K
| 1K
| 23
| 8
| 6
| 1
|-
| rowspan="2" | Core+
| Atmega644PA
| 64K
| 4K
| 2K
| 32
| 8
| 6
| 2
|-
| ATmega1284P 
| 128K
| 16K
| 4K
| 32
| 8
| 6
| 2
|}

* According above table, Core and Core+ are different in Flash, EEPROM and SRAM size, also, they 

supply different size of digital I/O and hardware serial ports, and there are 10 more digital I/O 

and 1 more hardware serial ports in Core+. Designers can select specific module regarding 

different application requirements on function, performance and power. 

* Both Core and Core+ use UPin-27 interface, Microduino program can be smoothly ported between 

them.

|-
|

==Features==
* Small, Stack, Strong
* Open source hardware, using the same development environment as Arduino IDE 
* '''[[Microduino-Core]]''' can be burned with ISP, same as Arduino, easy "bootloader"
* Using the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino, all 

Microduino modules and sensors can be easily stacked and extended through it
* Delivered ready to plug in.
* 2.54mm (0.1 inch) pin pitch, compatible to bread board and hole board

|-
|
==Specifications==
* Microcontroller: ATmega328P/ATmega168PA
* Operating Voltage: 5V/3.3V
* Input Voltage (limits): 6-20V
* Digital I/O Pins: 14 (of which 6 provide PWM output with D3，D5，D6，D9，D10 and D11)
* Analog Input Pins: 8 (2 more comparing to Arduino Uno)
* DC Current per I/O Pin: 40 mA
* DC Current:  50 mA
* Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data.
* External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low 

value, a rising or falling edge, or a change in value. See the attachInterrupt() function for 

details.
* PWM: 3, 5, 6, 9, 10, and 11. Provide 8-bit PWM output with the analogWrite() function.
* SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication using the SPI 

library.
* TWI: A4 or SDA pin and A5 or SCL pin. Support TWI communication using the Wire library.
* AREF. Reference voltage for the analog inputs. Used with analogReference().
* Flash Memory	32 KB (ATmega328P) of which 0.5 KB used by bootloader
* SRAM	2 KB (ATmega328P)
* EEPROM	1 KB (ATmega328P)
* Clock Speed	16MHz(5V) / 8Mhz(3.3V)

* Currently, there are 4 different configurations for '''[[Microduino-Core]]''' modules:
:{|class="wikitable"
! Type
! Flash
! SRAM
! EEPROM
! Frequecy
! Supply
|-
| Atmega328P@16M，5V 
| 32K
| 2K
| 1K
| 16M
| 5.0V
|-
| ATmega328P@8M，3V3 
| 32K
| 2K
| 1K
| 8M
| 3.3V
|-
| ATmega168PA@16M，5V 
| 16K
| 1K
| 512
| 16M
| 5.0V
|-
| ATmega168PA@8M，3V3 
| 16K
| 1K
| 512
| 8M
| 3.3V
|}

:[[file:Microduino-Core-Pinout1.png|800px|thumb|left|Microduino-Core-Pinout]]
:[[file:Microduino-Core-Pinout2.png|800px|thumb|left|Microduino-Core-Pinout]]
:[[file:Microduino-Core-Pinout3.png|800px|thumb|left|Microduino-Core-Pinout]]
:[[file:Microduino-Core-Pinout.png|800px|thumb|left|Microduino-Core-Pinout]]
<br style="clear: left"/>
* '''[[Microduino-Core]]''' pinout verctorgraph file【'''[[media:Microduino-Core-Pinout.pdf|

download]]'''】

|-
|

==Documents==
* Snapshot of '''[[Microduino-Core]]''' schematic and pcb 
:[[file:Microduino-Core-SCH.png|600px|thumb|left|Microduino-Core Schematic]]
<br style="clear: left"/>
:[[file:Microduino-Core-PCB.png|600px|thumb|none|Microduino-Core PCB]]
<br style="clear: left"/>

* '''[[Microduino-Core]]''' Eagle source file 【'''[[media:Microduino-Core.zip|download]]'''】
* '''[[Microduino-Core]]''' main chips and devices
** MCU: '''[[media:ATmega168PA328P.pdf|ATmega168PA/328P]]'''
** Crystal oscillator: '''[[media:CSTCE16M00G53.pdf|CSTCE16M00G53]]'''
** Switch: '''[[media:Switch-TS-018.jpg|TS-018]]'''
|-
|

==Development==
* Microduino Arduino IDE Configuration
** 1. Install Arduino IDE: Microduino use the same IDE as Arduino, please download Arduino IDE 

from 【'''[http://arduino.cc/en/Main/Software Arduino IDE official]'''】 and install it in your 

disk. (if you already have it, just skip this step). Please check Arduino IDE details from 

【'''[http://arduino.cc/en/Reference/HomePage Reference]'''】 and 

【'''[http://arduino.cc/en/Tutorial/HomePage Workshop]'''】. 
** 2. Patch Microduino package: Please download Microduino package for Arduino IDE from 

【'''[[media:Microduino.zip|download]]'''】, and unzip is to {Your Arduino Install 

Driectory}/hardware directory.
** Microduino Arduino IDE Reference workshop: 【'''[[Arduino IDE Microduino Configuration]]'''】. 
** 3. Programming: To upload program to Microduino-Core/Core+ through Arduino IDE, designers are 

recommended to use '''[[Microduino-FT232R]]''' module.
** 4. Enjoy your Microduino journey!

* Burn Microduino BootLoader
** Bootloader burning is necessary if designers want to update Microduino-Core/Core+ firmware by 

themselves, designers can leaverage Arduino Uno or another burned Microduino-Core/Core+ to make a 

new one.
** Microduino bootloader workshop: 【'''[[Burn Bootloader to Microduino-Core/Core+ with an 

Arduino]]'''】.
** Bootloader is specified for different Microduino-Core/Core+ configurations, correct one must be 

selected during burning.
** Initial bootloader is designed for ATmegaX8 series optiboot, which occupies only 512 bytes 

flash.
|-
|

==Applications==
* room-Microduino
* obdii-Microduino
* pilot-Microduino
* green-Microduino
* music-Microduino
|-
|

==Buy==
* Buy '''[http://www.ebay.com Microduino@eBay]'''

|-
|
==History==
*2012/12/16: Published Microduino-Core patch for Arduino IDE
*2012/11/18: Optimized the first formal release, finalized Miroduino-Core configuration
*2012/11/06: Beta version.

|-
|
==Pictures==
:[[file:Microduino-Core-F.JPG|thumb|600px|left|Microduino-core Front]]
<br style="clear: left"/>
:[[file:Microduino-Core-B.JPG|thumb|600px|left|Microduino-core Back]]
<br style="clear: left"/>
:[[file:Microduino-Core-3d.jpg|thumb|600px|left|Microduino-core 3D model]]
<br style="clear: left"/>
|}