“MPU6050.getMotion6()”的版本间的差异

来自Microduino Wikipedia
跳转至: 导航搜索
(创建页面,内容为“ <p style="color: #666666;font-size:220%">'''accelgyro.getMotion6(&ax, &ay, &az, &gx, &gy, &gz);'''</p> <br> <p style="color: #E87E05;font-size:135%">'''作用'''</…”)
(没有差异)

2017年12月18日 (一) 06:32的版本

accelgyro.getMotion6(&ax, &ay, &az, &gx, &gy, &gz);


作用

得到原始的加速度和角速度


参数

ax:加速度x

ay:加速度y

az:加速度z

gx:角速度x

gy:角速度y

gz:角速度z

示例

#include <MPU6050.h>

// class default I2C address is 0x68
// specific I2C addresses may be passed as a parameter here
// AD0 low = 0x68 (default for InvenSense evaluation board)
// AD0 high = 0x69
MPU6050 accelgyro;

int16_t ax, ay, az;
int16_t gx, gy, gz;

#define LED_PIN 13
bool blinkState = false;

void setup() {
    // join I2C bus (I2Cdev library doesn't do this automatically)
    Wire.begin();

    // initialize serial communication
    // (38400 chosen because it works as well at 8MHz as it does at 16MHz, but
    // it's really up to you depending on your project)
    Serial.begin(115200);

    // initialize device
    Serial.println("Initializing I2C devices...");
    accelgyro.initialize();

    // verify connection
    Serial.println("Testing device connections...");
    Serial.println(accelgyro.testConnection() ? "MPU6050 connection successful" : "MPU6050 connection failed");

    // configure Arduino LED for
    pinMode(LED_PIN, OUTPUT);
}

void loop() {
    // read raw accel/gyro measurements from device
    accelgyro.getMotion6(&ax, &ay, &az, &gx, &gy, &gz);

    // these methods (and a few others) are also available
    //accelgyro.getAcceleration(&ax, &ay, &az);
    //accelgyro.getRotation(&gx, &gy, &gz);

    // display tab-separated accel/gyro x/y/z values
    Serial.print("a/g:\t");
    Serial.print(ax); Serial.print("\t");
    Serial.print(ay); Serial.print("\t");
    Serial.print(az); Serial.print("\t");
    Serial.print(gx); Serial.print("\t");
    Serial.print(gy); Serial.print("\t");
    Serial.println(gz);

    // blink LED to indicate activity
    blinkState = !blinkState;
    digitalWrite(LED_PIN, blinkState);
}

返回MCookie-MotorPlus_Reference页面