Microduino-Cube-S1 - 版本历史

Pkj：/* Features */

2014-08-22T02:54:11Z

‎Features

Pkj：/* Application */

2014-08-15T08:06:15Z

‎Application

Pkj：/* Application */

2014-08-15T07:17:49Z

‎Application

Pkj：/* Development */

2014-08-15T07:03:02Z

‎Development

Pkj：/* Document */

2014-08-15T07:00:23Z

‎Document

Pkj：/* Specification */

2014-08-15T06:55:42Z

‎Specification

Pkj：/* Features */

2014-08-15T06:44:20Z

‎Features

Pkj：/* Application */

2014-04-03T01:38:45Z

‎Application

2014年3月26日 (三) 03:11 Pkj

2014-03-26T03:11:49Z

2014年3月13日 (四) 04:14 Pkj

2014-03-13T04:14:32Z

@@ 第6行： / 第6行： @@
 ==Features==
 *Compatible with the pin of Arduino Uno;
-*Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
+*Uniform Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
 *Onboard analog button and sensor interface;

@@ 第42行： / 第42行： @@
 ==Application==
-*You can download Microduino test program, which together with OLED to test the function of Microduino-Cube-S1's two analog buttons. Below is the test program:
+*You can download Microduino test program, which together with OLED to test the function of Microduino-Cube-S1's two analog buttons. Just as follows:
 https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073
 *Hardware Needed：Microduino FT232R, Microduino Core, Microduino-Cube-S1 and Microduino OLED；

@@ 第42行： / 第42行： @@
 ==Application==
-*You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program：
+*You can download Microduino test program, which together with OLED to test the function of Microduino-Cube-S1's two analog buttons. Below is the test program:
 https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073
-*Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED；
+*Hardware Needed：Microduino FT232R, Microduino Core, Microduino-Cube-S1 and Microduino OLED；
-*Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
+*Software Needed：Microduino example program (Arduino part) and Arduino IDE(Version 1.0 and higher)；
-*Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
+*Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", then download directly;
-*After download, OLED displays "No button is pressed ",
+*After the download, "No button is pressed " is displayed on the OLED,
-**Press the left button, OLED displays "Press the left button" which means the left button was pressed；
+**Press the left button and "Press the left button" will come out, meaning the left button gets pressed；
-**Press the right button, OLED displays "Press the rignt button" which means the right button was pressed；
+**Press the right button and "Press the right button" will be displayed on the OLED, meaning the right button is pressed；
-**If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.
+**When no button is pressed, "No button is pressed " will be displayed, which is just like the initial state.
 ==Bug==

@@ 第37行： / 第37行： @@
 ==Development==
-It can be used with other Microduino modules, sensor to achieve specific functions.
+Microduino-Cube-S1 is capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard, achieving specific function.
 [[file:Microduino-Cube-S1-Pinout4.jpg|800px|thumb|center|Microduino-Cube-S1]]

@@ 第30行： / 第30行： @@
 ==Document==
-Eagle PCB local downlaod
+Eagle PCB: '''[[File:Microduino-Cube-S1.zip]]'''
-Main components：
-*3.3V Regulator chip LP2985： '''[[File:LP2985.pdf]]'''
+Main Component：
 ==Development==

@@ 第10行： / 第10行： @@
 ==Specification==
-*Electrical specifications
+*Electrical specification
 **MicroUSB power supply；
-**3.3V regular；
+**3.3V constant voltage；
-**Select the 5V or 3.3V power via PWR jumper, default is 3.3V；
+**Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V)；
-**Onboard power supply (5V、PWR) indicator；
+**Onboard power supply indicator(5V and PWR) ；
-*Extended pin
+*Extension
 **Onboard reset button；
-**OLED fixed base；
+**The fixed OLED base；
-**Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1)；
+**Two serial ports including (RX0,TX0)and (D2,D3)；
 **Two IIC interfaces；
-***Two analogy button interfaces, and connect to A7；
+***Two analog button interfaces connected to A7；
-**Sensor interface can be combined by jumper, The player can make the connection by yoursefl, as follows：
+**The sensor interface can be selected and combined through jumpers：
-***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND.
+***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).
 [[file:Microduino-Cube-S1-Pinout1.jpg|800px|thumb|center|Microduino-Cube-S1]]

@@ 第1行： / 第1行： @@
-Microduino-Cube-S1
+{{Language | Microduino-Cube-S1}}
 {| style="width: 800px;"
 |-

@@ 第4行： / 第4行： @@
+|
 [[File:Microduino-S1-rect.jpg|400px|thumb|right|Microduino-Cube-S1]]
-==特色==
+==Features==
 *Pin compatible with Arduino uno;；
 *2.54 pitch board is the base for Microduino module, the same name pin are connected to each other on board, easy to debug.