“GestureSensor.readRedLight()”的版本间的差异
| 第6行： | 第6行： | ||
<p style="color: #E87E05;font-size:135%">描述</p> | <p style="color: #E87E05;font-size:135%">描述</p> | ||
读取颜色的红色通道亮度 | 读取颜色的红色通道亮度 | ||
| + | |||
<p style="color: #E87E05;font-size:135%">参数</p> | <p style="color: #E87E05;font-size:135%">参数</p> | ||
| + | 无 | ||
<p style="color: #E87E05;font-size:135%">返回值</p> | <p style="color: #E87E05;font-size:135%">返回值</p> | ||
红色通道亮度 | 红色通道亮度 | ||
| + | |||
<p style="color: #E87E05;font-size:135%">示例</p> | <p style="color: #E87E05;font-size:135%">示例</p> | ||
2018年6月1日 (五) 07:37的最新版本
|
GestureSensor.readRedLight()
描述 读取颜色的红色通道亮度 参数 无 返回值 红色通道亮度 示例 #include <Microduino_Gesture.h>
// Global Variables
Gesture gestureSensor;
void setup() {
// Initialize Serial port
Serial.begin(9600);
// Initialize Gesture (configure I2C and initial values)
if ( gestureSensor.begin() ) {
Serial.println(F("Gesture initialization complete"));
} else {
Serial.println(F("Something went wrong during Gesture init!"));
}
// Start running the Gesture light sensor (no interrupts)
if ( gestureSensor.enableLightSensor(false) ) {
Serial.println(F("Light sensor is now running"));
} else {
Serial.println(F("Something went wrong during light sensor init!"));
}
// Wait for initialization and calibration to finish
delay(500);
}
void loop() {
// Read the light levels (red)
Serial.print(" Red: ");
Serial.print(gestureSensor.readRedLight());
// Wait 1 second before next reading
delay(1000);
}
其他 |
