查看“Microduino-Zigbee”的源代码

{{Language|Microduino-Zigbee}}
{| style="width: 800px;"
|-
|
[[File: Microduino-zigbee-rect.jpg|400px|thumb|right|Microduino-Zigbee]]

Microduino-Zigbee adopts CC2530 chip, which is a short-distance, simple, low-power, low-rate and low-cost bidirectional wireless communication technology. It is mainly used in data transmission applications among various electronic devices.  





==Features==

*CC2530 combines high performance of the leading RF transceiver and the standard enhanced 8051 CPU in the industry, owning in-system programmable flash, 8-KB RAM and many other powerful functions.   
*Serial transmission；
*Reserved CCDEBUG interface, making it easier for users’ second development;  
*Enough power, easy to reach 100 meters wirelessly; 
*Small, cheap, stackable and open source;  
*Open source hardware circuit design and Arduino compatible programming development environment;  
*Uniform Microduino interface standard makes it easy and flexible to connect and extend with other Microduino modules; 
*2.54mm pin pitch makes it easy to be integrated to a pegboard.    

==Specification==
Specification of electrical application  
*RF/Layout 
**RF transceiver suitable for 2.4-GHz IEEE 802.15.4 
**Extremely high receiving sensitivity and resistance to interference    
**Programing output power is up to 4.5 dBm   
**System configuration suitable Radio Frequency Regulations: ETSI EN 300 328 and EN 300440 (in Europe), Part 15 FCC CFR47 (in US.) and ARIB STD-T-66 (in Japan)

*Low Power Consumption 
**Active Mode RX (CPU free): 24mA 
**Active Mode TX in 1dBm (CPU free): 29mA   
**Power Supply Mode 1 (4μs Awaking): 0.2mA  
** Power Supply Mode 2 (Sleep Timer Running): μA   
** Power Supply Mode 3 (External Interrupt): 0.4 μA
**Wide supply voltage range (2 V–3.6 V)    （2 V–3.6 V）

*Microcontroller 
**Fine performance and low-power 8051 microcontroller core with code prefetching function.   
**256KB in-system programmable flash 
**8-KB RAM, capable of data saving in various power supply modes.  
**Support hardware debugging 

*Peripherals  
**Strong 5-channel DMA  
**IEEE 802.5.4 MAC timer and general purpose timer. (One is 16-bit and the other is 8-bit timer.) 
**32-KHz sleep timer with capture function  
**Hardware support CSMA/CA
**AES secure coprocessor  
**WATCHDOG Timer

*Pin description：
{|class="wikitable"
! rowspan="1" | Chip pin || Microduino pin || Function
|-
| RES||RST||Device reset  
|-
| SCLK||D13|| SPI serial clock input (SCLK)   
|-
| CS|| A1|| SPI CS 
|-
| MISO||D12|| SPI MISO 
|-
| MOSI|||D11||SPI MOSI 
|-
| TX	||RX0（orD2/D4）||Serial sending pin (TTL electrical level), capable of connecting single chip microcomputer RXD  
|-
| RX	||TX1（orD3/D5）||Serial receiving pin(TTL level), capable of connecting MCU TXD  
|}

==Document==

==Development==

==Application==

==Purchase==

==History==

==Pictures==

==Front==
[[file:Microduino-Zigbee-F.JPG|thumb|600px|center|Microduino-Zigbee Front]]
==Back==
[[file:Microduino-Zigbee-b.JPG|thumb|600px|center|Microduino-Zigbee Back]]
==Video==
|}