查看“SD卡相关声明”的源代码

<pre style="color:green">
File myFile;

Sd2Card card;

SdVolume volume;

SdFile root;
</pre>

*'''作用''':<br>
**File myFile;
**声明文件操作类，用于文件写入或读取

**Sd2Card card;
**声明SD卡类，用于读取SD卡信息等操作

**SdVolume volume;
**声明SD卡容量，用于读取SD卡容量及文件系统类型等操作

**SdFile root;
**作用原理与File类声明相同，但是此处声明为SDFile类，用于文件操作

**其具体构成与描述均在IDE安装路径下的“\libraries\_05_m_Module_SD\utility”中

*'''参数''':<br>
**类名可根据程序起为其他名字，此处为方便理解使用"card""volume""root""myFile"等

*'''例子''':<br>
**以上几种声明在Microduino IDE中的Module_SD库示例的CardInfo例程中均有使用<br>
<pre style="color:green">
#include <SPI.h>
#include <SD.h>

// set up variables using the SD utility library functions:
Sd2Card card;
SdVolume volume;
SdFile root;

// change this to match your SD shield or module;
// Arduino Ethernet shield: pin 4
// Adafruit SD shields and modules: pin 10
// Sparkfun SD shield: pin 8
// Microduino SD module: pin 7
const int chipSelect = D7;

void setup() {
  // Open serial communications and wait for port to open:
  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for native USB port only
  }


  Serial.print("\nInitializing SD card...");

  // we'll use the initialization code from the utility libraries
  // since we're just testing if the card is working!
  if (!card.init(SPI_HALF_SPEED, chipSelect)) {
    Serial.println("initialization failed. Things to check:");
    Serial.println("* is a card inserted?");
    Serial.println("* is your wiring correct?");
    Serial.println("* did you change the chipSelect pin to match your shield or module?");
    return;
  } else {
    Serial.println("Wiring is correct and a card is present.");
  }

  // print the type of card
  Serial.print("\nCard type: ");
  switch (card.type()) {
    case SD_CARD_TYPE_SD1:
      Serial.println("SD1");
      break;
    case SD_CARD_TYPE_SD2:
      Serial.println("SD2");
      break;
    case SD_CARD_TYPE_SDHC:
      Serial.println("SDHC");
      break;
    default:
      Serial.println("Unknown");
  }

  // Now we will try to open the 'volume'/'partition' - it should be FAT16 or FAT32
  if (!volume.init(card)) {
    Serial.println("Could not find FAT16/FAT32 partition.\nMake sure you've formatted the card");
    return;
  }


  // print the type and size of the first FAT-type volume
  uint32_t volumesize;
  Serial.print("\nVolume type is FAT");
  Serial.println(volume.fatType(), DEC);
  Serial.println();

  volumesize = volume.blocksPerCluster();    // clusters are collections of blocks
  volumesize *= volume.clusterCount();       // we'll have a lot of clusters
  volumesize *= 512;                            // SD card blocks are always 512 bytes
  Serial.print("Volume size (bytes): ");
  Serial.println(volumesize);
  Serial.print("Volume size (Kbytes): ");
  volumesize /= 1024;
  Serial.println(volumesize);
  Serial.print("Volume size (Mbytes): ");
  volumesize /= 1024;
  Serial.println(volumesize);


  Serial.println("\nFiles found on the card (name, date and size in bytes): ");
  root.openRoot(volume);

  // list all files in the card with date and size
  root.ls(LS_R | LS_DATE | LS_SIZE);
}


void loop(void) {

}
</pre>
<br>
<p style="color: #E87E05;font-size:135%">其他</p>

* SD :

*[[SD.begin()|begin()]]
*[[SD.open|open()]]

* myFile :

*[[myFile.close()|close()]]
*[[myFile.available()|available()]]
*[[myFile.read()|read()]]

<br>

[[MCookie-SD Reference | 返回SD模块语法手册]]