Microduino-IR Transmitter

Language	English

Microduino-IR-transmitter Microduino-IR-transmitter is an infrared emission sensor. Features Low power and high sensitivity; Specification Electrical specification 3.3V~5V operation voltage; Output device Tech parameters Infrared spectrum 1~3 µm Size Size of the LED light: 5mm*5mm， Size of the board: 20mm*20mm 1.27mm-pitch 4PIN interface Connection method Pin description: GND, VCC, signal output and NC(empty). Since the output signal is digital, it needs to be driven by PWM digital interface. It can be connected to the pins (6) of the Sensorhub with the corresponding D6 pin . Document Schematic:文件:Microduino IR-transmitter.Zip Development Preparation Make sure you build Microduino IDE or refer to: Microduino Getting started Core selection 1. Adopt Microduino-CoreUSB or mCookie-CoreUSB as the core. 2. Adopt Microduino-Core or Microduino-Core+ as the core plus Microduino-USBTTL as the program download module. Program Open " IRsendDemo " program in the libraries. 文件:MCookie-IRsendDemo.JPG 800px include <IRremote.h> Use infrared library function IRsend irsend; Define infrared receiving object irsend.sendSony(0xa90, 12); Send infrared code Hardware Buildup Stack all modules together, then use dupont lines to connect the interface on the back of the IR-transmitter with the D3 digital port of the Sensorhub. Microduino-Sensorhub 文件:Microduino-sensorhub D3.PNG 400px mCookie-Hub 文件:MCookie-sensorhub D3.PNG 400px Connect the core, Sensorhub and theLED to a computer with a USB cable. Select the right board and COM port, compile and download. You can refer to AVR Core：Getting started Open Arduino IDE, select File→Examples→Microcuino→Sensor_IRremote→IRsendDemo program examples, choose the right board from Tools→Board and then compile. Select the right port from Tools→Serial Port in Arduino IDE after compiling, then download program. After download, you can open the serial monitor. Input any values at the console and you'll see the LED on the IR-transmitter blinks once, meaning the infrared signal has been sent. Application Microduino-IR-Transmitter can be used for infrared remote control and is suitable for all kinds of home appliances control. You need to make sure the infrared signal type and protocol format before using. Project Purchase History Pictures Front 文件:Microduino-IR-transmitter-F.JPG Microduino-IR-transmitter Front Back 文件:Microduino-IR-transmitter -b.JPG Microduino-IR-transmitter Back